Image shows a Leimac IDGC-100M8

LTLC9508

Leimac IDGC-100M8

Light Controller, 8 PWM Channels, 100 W

8-channel light controller
100 watt supply
100 - 240 VAC input voltage
Choice of control interfaces

The Leimac IDGC-100M8 light controller is compatible with most constant voltage lights. It can deliver a total of 100 watts across its 8 output channels.

The IDGC light controllers are available in a large number of different configurations. We offer an appropriate controller for each installation, with some models powering up to 8 independent channels at 150 watts total.

Most models may be configured to have either an Ethernet, RS232, or combined 8-bit parallel / 0 - 5 VDC analog interface.

This controller has one high-speed input per channel that enables precision strobe control.

(The photo shown above is generally representative of the product family. Please refer to the drawing for dimensions and connectors.)

Loading...

Electrical

Output Channels: 8
Control Interfaces: Analog, Manual, Ethernet TCP/IP, Parallel, RS232
Control Method: Voltage Control, PWM
Input Voltage: 100 - 240 VAC, 50/60 Hz
Output Voltage: 12 VDC or 24 VDC, depending on model
Output Power: 100 W Total (not to exceed 70 W per channel)
Output Channels: 8
PWM Frequency: ~125 kHz (256 levels)
Variable Delay Range: 1 μs intervals between 0 and 9000 μs. (Add to electrical input response time.)
Variable Output "On" Range: Output can be triggered to remain "on" for 0.1 to 999.9 ms, in 0.1 ms intervals
Input Response: High Mode Off to On: < 60 μs; High Mode On to Off: < 10 μs Low Mode Off to On: < 10 μs Low Mode On to Off: < 60 μs
Auto MDI/MDIX: Standard (for Ethernet models)

Environmental

Operating Temperature: 0 to 40°C
Operating Humidity: 20 to 70%, non-condensing
Storage Temperature: -20°C to +65°C
Storage Humidity: 20% to 85%, non-condensing
Vibration Resistance: 19.6 m/s2, 10 to 55 Hz, 30 minutes each in the X-, Y-, and Z-directions
Shock Resistance: 98 m/s2, three times each in the X-, Y-, and Z-directions

Miscellaneous

Programming Function: Up to 16 steps

Connectors

Light Connector Type: JST SMP-02V-BC (12 V) or JST SMP-03V-BC (24 V)
Light Connector Qty: 8
I/O Connector: Omron XG4A-2031
Power Connector: IEC 60320 C14 "PC type" receptacle
Ethernet Connector: RJ-45 (Ethernet models only)
RS232 Connector: Hirose HR10G-7R-4S73 (RS232 models only)

Standards

Conformance CE, UKCA, PSE

Choose an output voltage

12V 12 volt
24V 24 volt

Choose a control interface

TP Ethernet
S2 RS-232C
PV 8-bit parallel / 0 - 5V analog

Not available for purchase outside of US & Canada.

Please sign in to check inventory.

Loading...


See Resources section below to download drawings.

Disabled resource link Drawings, 12V
Disabled resource link Hardware Manual
Disabled resource link Drawings, 24V
Disabled resource link Sample Application Manual
Disabled resource link Sample Application


Sign In or Register to unlock all links above.

Leimac, Ltd. warranties controllers against failure for 2 years from date of factory shipment. Warranty shall not apply if failure is due to factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.

Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)